Plug-in
You can set the following properties in the configuration of the scanner plug-in for a barcode reader:
| Name | Any name where this device appears in the connection configuration. |
| COM Port | Enter the COM port for communication with the barcode reader. |
Connection settings serial Barcode reader
| Baud rate | Select a baud rate. Specifies how often a signal in a communication channel changes state. |
| Data bits | Specify how many bits of data to transfer. |
| Parity | Select a parity from the drop-down menu. For example, Even, Mark, Space. |
| Stop bits | Specify how many stop bits are needed. |
| Flow control | Select how the data flow should be controlled. Eg. software, hardware |
Connection settings Tcp Barcode reader
| IP | Enter the IP of your Tcp barcode scanner. |
| Port | Enter the port of your Tcp barcode scanner. |