Trigger
The Euromap77 trigger triggers the data transfer when the temperature value changes of a data point. The following trigger applications are available:
- Temperature datachange trigger: Monitors temperature changes within the selected injection molding machine.
- Temperature deviation: To monitor temperature-threshold violations of the selected injection molding machine.
The individual properties are:
| Profil | Here the profiles are available as configured instances of the Euromap77 plug-in. Select a profile from the drop-down list. |
| Destination | Select an endpoint from the drop-down list. The “Check” button allows you to verify that your connection is working. |
| Machine | Select a machine from the drop-down list. In the list below you will now get a selection list with all possible information of this machine. Activate the areas that are necessary for your configuration. You can now use this selected information as transfer information. |
By selecting the temperature zone type “InjectionUnit” or “Mould” and selecting the appropriate temperature monitoring, you specify the following properties:
Features temperature datachange trigger
| At most every | Time interval in which data is transferred in any case, even if the value of the data point has not changed. Default always as an integer, no decimal places. As units therefore milliseconds, seconds, minutes or hours are to be selected. |
| At least every | If the value of the data point changes frequently, the transfer number can be limited over an interval. The entry thus means: It is at most e.g. transmitted every second, even if the value changes more often Default always as an integer, no decimal places. As units therefore milliseconds, seconds, minutes or hours are to be selected |
| Trigger at ... difference (%) | The transfer is only triggered if the value of the data point changes by this entry (relative). |
| Trigger at ... difference (absolute) | The transfer is only triggered if the value of the data point changes by this entry (absolute). |
| Trigger at each data change | Default setting, sets trigger at ... difference override. |
Features temperature deviation
| Trigger if Low-Deviation-Temperature 1 deceeds | When activated, the temperature is only triggered when falling below the low deviation. |
| Trigger if High-Deviation-Temperature 1 exeeds | When activated, the temperature is triggered only when the highest deviation is exceeded. |