Plug-in
The following properties have to be specified for each set of Heidenhain access data:
Heidenhain Access Data
General
| Name | This set’s name. The name will be shown in projection. Select a name you will recognize! |
| Host/IP | Heidenhain-Server’s address |
| Type | Heidenhain CNC type. |
| DNC Protocol | Select DNC Protocol |
| Port | Select Ethernet port. |
| Update rate | Select values update rate in milliseconds |
| Timeout | Select the connections timeout in milliseconds |
| Transfer OPCNULL values | Check if NULL values should get transferred, |
Security
| CFGDATAACCESS | If the password is set, the checkbox must be activated and the valid password entered in order to be able to access the configuration. |
| PCLDATAACCESS | If the password is specified, the checkbox must be activated and the valid password entered in order to be able to access the data of the PLC program and the properties of the PLC runtime. |
| TABLEDATAACCESS | If the password is set, the checkbox must be activated and the valid password entered in order to able to access ll tables, including that of the tool. |
Following control systems are supported:
warning
Important: The machines need an Ethernet interface an the option DNC / option 18 needs to be enabled.
| Control system | from NC Version | from DNC Version |
| iTNC 530 | 340420-06, 340422-01 | 1.6.1 |
| iTNC 530 | 340480-01 | 1.6.1 |
| iTNC 530 | 34049x-03, 60642x-01 | 1.6.1 |
| NCK based | ||
| TNC 128 | 771841-01 | 1.5.1 |
| TNC 320 | 340551-03, 771851-01 | 1.5.1 |
| TNC 620 | 34056x-01, 73498x-01, 81760x-01 | 1.5.1 |
| TNC 640 | 34059x-01 | 1.5.1 |
| MANUALplus 620 | 548328-05, 54843x-01 | 1.5.1 |
| CNC PILOT 620 | 688945-01 | 1.5.1 |
| CNC PILOT 640 | 688946-01, 688947-01 | 1.3.1 |
| MillPlusIT V6x0 | 53895x-03, 73738x-01 | 1.5.1 |
| GrindPlusIT | 510060-04 | 1.5.1 |
| GrindPlus 640 | 73502x-01 | 1.5.1 |