Time trigger

The time trigger triggers data transfers at variably intervals in a time-controlled interval. If a transfer is to be carried out once a day, you can also specify a fixed time.

The individual properties are:

Periodic transfer	The transfer will be triggered at the specified interval.
Transfer interval	The interval at which the transfer is triggered. If start delay = 0, the first transfer after router start will not be triggered until the interval has elapsed. Default always as an integer, no decimal places. As units therefore milliseconds, seconds, minutes, hours or days are to be selected. The router always calculates the new interval after the end of the last transfer, so that at setting “1 s” a transfer will not be triggered every second, but 1 second after the end of the previous transfer.
Start delay	Start delay after which the interval count starts after the router has started. The first transfer thus takes place after elapse of start delay + transmission interval. Default always as an integer, no decimal places. As units therefore milliseconds, seconds, minutes, hours or days are to be selected.
Point in time	The transfer will be triggered once a day at the set time.
Point in time	Time at which the transfer is triggered.